OS5009P+
Configurable PoE Switch,
8x2.5GBase-T, 1x10GBase-X SFP+
- 4x2.5G Ethernet ports with 802.3bt PoE++ support
- 4x2.5G Ethernet ports with 802.3af/at PoE+ support
- 1x10G SFP+ port
- Total PoE budget: 200 W (up to 90 W per port 1-4, up to 30 W per port 5-8)
- ESD protection up to 8kV
- VLAN Mode for enhanced network security
- Mode configuration via DIP switch
Description
OS5009P+/200W is a configurable switch with 4x2.5GBase-T PoE++ ports, 4x2.5GBase-T PoE+ ports and 1x10G SFP+ port.
The ORIGO OS5009P+/200W is a simple and reliable solution for organization of remote power supply to surveillance cameras, wireless access points, IP phones and other PoE devices.
The ports 1-4 support the PoE++ (802.3bt), providing up to 90 W for each port, ports 5-8 support the PoE (802.3af) and PoE+ (802.3at) standards, providing up to 30 W for each port with a total PoE budget of 200 W. VLAN Mode can be used to isolate PoE ports traffic for video surveillance systems. The switch is resistant to electrostatic discharges up to 8 kV.
The 10Gbps SFP+ port provides reliable high-speed connectivity to an upstream switch via fiber optics.
Specification
|
Hardware
|
|
|
Interfaces
|
• 8x100/1000/2.5GBase-T PoE ports
• 1x10GBase-X SFP+ port
|
|
Standards and Functions
|
• IEEE 802.3 10Base-T
• IEEE 802.3u 100Base-TX
• IEEE 802.3ab 1000Base-T
• IEEE 802.3bz 2.5GBase-T
• IEEE 802.3z 1000Base-X
• IEEE 802.3ae 10GBase-X
• IEEE 802.1af PoE
• IEEE 802.1at PoE+
• IEEE 802.3bt PoE++
• IEEE 802.3x (Full Duplex Flow Control)
• IEEE 802.3az Energy-Efficient Ethernet
• Auto MDI/MDIX on all copper ports
|
|
LEDs
|
• Power
- On – power on state
- Off – power off state
• Link/Act (ports 1 – 9)
- Always bright: terminal device is connected
- Flicker – data pass
- Off – no connection
• PoE
- Always bright – PoE device is connected
- Flicker – Output power on PoE port is close to maximum
- Off – PoE device is not connected
|
|
DIP Switches
|
• Standard Mode (Default)
- Traffic isolation off
• VLAN Mode
- Traffic isolation for ports 1 – 8
|
|
Buttons
|
• Reset
|
|
Power
|
• Power connector (AC)
|
|
Mounting
|
• Desktop
|
|
Capacity
|
|
|
Switching Capacity
|
• 60 Gbps
|
|
Packet Forwarding Rate
|
• 44.64 Mpps
|
|
Transfer Mode
|
• Store-and-forward
|
|
MAC Address Table
|
• 4K entries
|
|
Packet Buffer
|
• 1 MB
|
|
Jumbo Frame
|
• 12 KB
|
|
PoE
|
|
|
PoE Standard
|
• IEEE 802.3af
• IEEE 802.3at
• IEEE 802.3bt
|
|
PoE Ports
|
• 1-8
|
|
Max. Power Consumption per Port
|
• 90 W (per PoE port 1-4)
• 30 W (per PoE port 5-8)
|
|
PoE Power Budget
|
• 200 W
|
|
Physical Parameters
|
|
|
Dimensions (L x W x H)
|
• 280 x 180 x 44 mm
|
|
Operating Conditions
|
|
|
Power Input
|
• 100–240 V AC, 50/60 Hz
|
|
Temperature
|
• Operating: 0 to 40 °C
• Storage: -40 to 70 °C
|
|
Humidity
|
• Operating: 10% to 90% non-condensing
• Storage: 5% to 90% non-condensing
|
|
Package Contents
|
|
|
Package Contents
|
• OS5009P+/200W Switch
• Power Cord
• Quick Installation Guide
|