OS3254P RealTek
48-Port Gigabit L3 PoE Switch with 6SFP+ Uplink (370W)
Feature
Hardware
Feature
- Support IEEE 802.3at standard, compatible with IEEE 802.3af electrical power devices (PD);
- Single port output power up to 30W;
- Automatic detection and identification of standard PoE power receiving devices, with intelligent power supply system which will not burn down non-standard PoE power receiving devices or common devices;
- Port power supply priority is supported to ensure continuous power supply for key nodes on the network;
- Automatic detection power supply device;
- RJ45 supports automatic port flip (Auto MDI/MDIX);
- Monitor the working status through panel lamps to assist in fault analysis;
- IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow control;
- Excellent and affirmed security system;
- 3-layer routing protocol control, adaptable to multiple services, efficient and secure information transmission;
- Support static convergence and dynamic convergence (LACP) 2 convergence modes, effectively increase the link bandwidth, improve the reliability of the link, and at the same time can achieve load balancing, link backup;
- Flexible and convenient to manage and maintain, and supports various management modes, such as Console, Telnet, and SSH;
- Support WEB management, being much more simple, efficient, and convenient for installation and debugging,
- Support file upload and download management through TFTP.
Hardware
- Standard IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1x, EEE 802.1q, IEEE 802.1p, IEEE 802.1d, IEEE 802.1w, IEEE 802.3ad, IEEE802.3bz, IEEE802.3ae, IEEE802.3af, IEEE802.3at
- Interface
- 48 x 100/100/1000Mbps RJ45 Ports
- 6 x 10Gbps SFP+ Fiber-optic module expansion Slots
- 1 Console Port
- Indicator PWR, LNK/ACT, SYS, PoE
- Network Media
- 10BASE-T: Cat 3, 4, 5 unshielded twisted pair cables(≤100m)
- 100BASE-TX: Cat 5 and over, unshielded twisted pair cable(≤100m)
- 100BASE-TX: Cat 5 and over, unshielded twisted pair cable(≤100m)
- 100BASE-FX: MMF, SMF
- 10000BASE-X: MMF, SMF
- MAC Address Table 32K, Auto-learning, Auto-update
- Jumbo Frame 12KBytes
- Packet Buffer 16Mbit
- Transfer Mode Store-and-forward
- Packet Forwarding Rate 71Mpps
- Switching Capacity 216Gbps
- Dimensions 440 x 330 x 44mm
- PoE Port Port 1~48
- PoE Power On RJ45 Mode A 1/2(+) , 3/6(-)
- PoE Power Output 30W(MAX)
- PoE Power Budget 370W
- Power Supply 400W
- Input Power Supply 100~240V AC,50/60Hz,
- Fan 5 pcs
- Working Temperature 0°C ~ 40 °C
- Storage Temperature -40 °C ~ 70 °C
- Working Humidity 10% ~ 90% non-condensing
- Storage Humidity 5% ~ 90% non-condensing
- Surge Protection Common mode ±4KV, Differential mode ±2KV
- MTBF >100000 hour
- Electrostatic Standard Contact ±6KV, Air ±8KV
Software
L3 Features
- RIP
- RIPv1/v2
- OSPF
- OSPFv2
- BGP
- BGP4
L2 Features
- MAC Address Table
- MAC Address Size
- MAC Aging Time
- MAC Filter`
- MAC Notification
- Basic Management
- Console/Telnet/SSH
- Http/Https、SSL/TLS
- FTP/TFTP
- Syslog
- SNMP(v1/v2c/v3)、SNMP Trap
- SNTP/NTP
- CPU protect
- Software/Hardware watchdog
- Firmware Upgrade/Backup
- Ping/Traceroute
- Port Config
- Bandwidth Control
- Flow Control
- EEE
- MTU
- CFM(802.1ag)
- EFM OAM(802.3ah)
- DDM
- Storm Control
- Port Isolation
- Port Security
- Virtual Cable Test
- ULDP/Cisco UDLD
- Discovery
- LLDP(802.1ab)
- LLDP-MED
- Link Aggregation
- Static
- LACP(802.3ad)
- Load Balance(src-mac/dst-mac/src-ip/dst-ip)
- Max groups and ports per group
- VLAN
- VLAN(802.1Q 4K)
- Access/Trunk/Hybrid
- Private VLAN
- VLAN Filter
- MAC-based VLAN
- Protocol-based VLAN
- IP Subnet-based VLAN
- Voice VLAN
- GVRP/GMRP
- QinQ/Selective-QinQ/Flexible QinQ
- VLAN Translation/N:1 VLAN Translation
- Guest VLAN
- Network Loop Detection
- Loopback Detection
- ERPS
- Spanning Tree
- STP/RSTP/MSTP
- MSTP Support 64 instance
- BPDU Guard/Root Guard/BPDU Tunnel
- ARP
- Static ARP
- ARP Scanning Prevention
- ARP Spoofing Prevention
- ARP Guard
- Gratuitous ARP
- Dynamic ARP Inspection
- ARP Quantity Control
IPv4 Related Function
- ICMP
- Anti ICMP Attack
- ICMP Rate Limit
- ICMP Unreachable Drop
- IP Forward
- Static Route
- Route Aggregation
- Control Multicast
- DCSCM
- Multicast VALN
- Multicast VALN
- IGMP
- IGMP SNOOPING V1/V2/V3
- Fast Leave
- IGMP Proxy
- DHCP
- DHCP Server
- DHCP Client/BOOTP
- DHCP Relay
- DHCP Snooping
- DHCP Option 82/43/60/61/67
IPv6 Related Function
- DHCPv6
- DHCPv6 Server
- DHCPv6 Relay
- DHCPv6 Snooping
- IPv6 SAVI
- Security RA
- IPv6 Unicast Routing
- Static Route
- IPv6 Multicast Routing
- MLD v1/V2 Snooping
- IPv6 Features
- SNMP over IPv6 Support
- HTTP over IPv6 Support
- SSH over IPv6 Support
- DNS over IPv6 Support
- IPv6 ping/traceroute Support
- IPv6 Telnet Support
- IPv6 Radius+ Support
- IPv6 Tacacs+ Support
- IPv6 SNTP/NTP Support
- IPv6 FTP/TFTP Support
- IPv6 IPSec Support
- IPv6 ACL
QOS
- Basic
- Trust COS/DSCP
- Trust Port
- Scheduling
- SP
- WRR
- WDRR
- PolicyMap Stream
- Based on VLAN
- Based on COS/DSCP
- Aggregate PolicyMap
- Ingress PolicyMap
- Policing
- CAR Stream Shaping(leak algorithm)
- Ingress Policing
- Rewrite
- COS/802.1p Priority
- IP Precedence
- IPv4 DSCP/IPv6 DSCP
- drop-precedence
- internal-priority
- Ingress/Egress Rewrite
- Queuing
- DSCP to DSCP mapping
- DSCP to DP mapping
- DSCP to Queue mapping
- COS to DP mapping
- COS to Queue mapping
ACL
- IP-ACL
- SIP/DIP
- IP Protocol
- IP Priority(DSCP,TOS, Precedence)
- TCP,UDP src,dst Port
- MAC-ACL
- SRC/DST MAC
- VLAN
- COS
- Tag/Untag
- IP-MAC ACL
- MAC-ACL and IP-ACL
- User-defined ACL
- Base on user defined profile
- ACL Features
- Based on time period ACL
- ACL on VLAN
- Based on ACL Stream
Security
- 1x
- Port Based Authentication
- Support EAPoR
- MAC based Authentication
- Guest VLAN
- MAB
- Based on Port Authentication
- Based on MAC Authentication
- MAC Address Count Limit
- Based on Port
- Based on VLAN
- IP Address Count Limit
- Based on Port
- Based on VLAN
- Access Management
- Based on source mac and IP address
- Deny DoS Attack
- TCP Flag
- TCP Flagment
- IP Segment
- ICMP
- TACACS+
- Standard Support
- Radius
- Standard Support
- Client, Support MD5
- SSL
- Openssl 1.1.0
Redundancy Related Function
- MRPP
- Compatiable ERRP
- ULPP
- Uplink Protection Protocol
- Smart Link/Monitor Link
- ULSM
- Uplink State Monitor
Mirror
- Mirror
- Support one to one, multi to one
- Port based mirror, support ingress, egress, and both
- CPU based mirror
- Flow based mirror
- RSPAN
PoE
- PoE Management
- ON/OFF Config
- Alive Checking for PD
- 7/24 On/Off Scheduling